UPLC 장비를 이용해서 분석이 필요한 분은
사전에 전화상담으로 일정을 정하신 후 사용 가능합니다.
전화: 02-866-2980
장비 규격: 아래 테이블 참조
장비위치 : 이매스 교육센터 분석실
장비상태 : 정상
사용가능요일 : 월~금, 평일 오전 09:00-19:00
사용료 : 5,000원/시간
바이알/캡 최저비용 제공
용매는 직접 가져오거나 유료로 제공이 가능
Hardware Specifications (Limited)
Here are limited specifications for the typical components used in the Nexera XR system.
Detailed specifications are located within the component's pages.
System Controllers
Degassers
Pumps
Autosamplers
Column Ovens
Detectors
Here are limited specifications for the typical components used in the Nexera XR system.
Detailed specifications are located within the component's pages.
System Controllers
Degassers
Pumps
Autosamplers
Column Ovens
Detectors
Pump
LC-30AD | |||
---|---|---|---|
Degassing Unit | 3 or 5 Lines (Volume 400 μL) | ||
Flow rate range | 0.0001 to 10 mL/min | ||
Flow rate precision | No more than 0.06% RSD or 0.02 min SD, whichever is greater | ||
Gradient type | High-pressure / low-pressure mixing gradient | ||
Gradient / concentration precision | ±0.5% (specified conditions) | ||
Maximum pressure | 130 MPa (0.0001 to 3 mL/min) 80 MPa (3.0001 to 5 mL/min) 22Mpa (5.0001 to 10 mL/min) |
Autosampler
SIL-30A/C | SIL-30ACMP | |
---|---|---|
Injection method | Needle-in-flowpath | Needle-in-flowpath |
Injection volume accuracy | ±1% (at 50 μL injectiong, n = 10) | ±1% (at 50 μL injectiong, n = 10) |
Injection volume range | 0.1 to 50 μL (Option: 0.1 to 100 μL) | 0.1 to 50 μL (Option: 0.1 to 100 μL) |
Injection volume reproducibility | RSD: 0.3% maximum (at 10 μL) | RSD: 0.2% maximum (at 10 μL) |
Samples capacity | Sample plate: 175 (1 mL), 105 (1.5 mL), 50 (4 mL), 2 (MTP/DWP plates) Control plate: 10 (1.5 mL) |
Sample plate: 324 (1.5 mL), 576 (96 well MTP/DWP Plates), 2304 (384 well MTP/DWP plates) Control plate: 10 (1.5 mL) |
Sample cooler | Block cooling/heating, used together with defumidifying function 4 to 40°C |
Block cooling/heating, used together with defumidifying function 4 to 40°C |
Oven
CTO-30A | ||
---|---|---|
Oven Capacity | Up to 2 - 150 mm columns | |
Temperature control range | Room temperature ± 5 to 150°C, Setting range 4 to 150°C |
PDA Detector
코멘트 0